SiF/SiFF

SiF/SiFF

Application

Silicone single core cables are used in high as well as extremely low temperature areas. They are used mainly in the steel producing industries, in aviation industries as well as in ship building, cement, glass and ceramic factories. These cables are halogen-free, especially suited for use in power stations.

Standards

Adapted to VDE 0250 part 1 and 502.

Cable Construction

Tinned copper conductor Cl. 5, to EN 60228.
Silicone core insulation.

Type SiFF :
This variant is similar to SiF with high flexible copper strands.
*SiF and SiFF is also available with polyester yarn over the cable.

Properties
Advantages : High ignition or flash point.
Resistant to : High molecular oils, fats from vegetables and animals, alcohols, plasticisers and clopenes, diluted acids, dyes and salt dissolution, oxidation substances, tropical influences and weather, lake water, oxygen and UV
Halogen – Free : According to IEC 60754-2
Behaviour in Fire : Flame propagation test according to EN 60332-1-2

Cable Design Parameters

Kindly complete the part numbers for SiF and SiFF by adding the suffix (in place of ‘xx’) for the colour required: 01 – green, 02 – black, 03 – red, 04 – blue, 05 – yellow, 07 – white, 09 – brown, 10 – orange, 12 – grey.

Technical Data

Voltage Rating : UO / U – 300 / 500V

Test Voltage : 2000V

Temperature Range : -50°C to +180°C (up to + 200°C for short time with adequate ventilation)

Minimum Bending Radius : Fixed installation: 6 x cable ø. One bend at end of core: 3 x cable ø

*For the variants with polyester yarn braid i.e., SiF-PYB & SiFF-PYB, the insulated core colour shall be white.
Kindly complete the part numbers for these cables by adding the suffix (in place of ‘z’) for the colour of polyester yarn required:
01 – green, 02 – black, 03 – red, 04 – blue, 05 – yellow, 07 – white.